GOLDCAR Clear Coat easy HS 2:1 5L + 2.5L Hardener

Product Information
GOLDCAR – About the brand:

GOLDCAR is a product line that every workshop, even the smallest, can afford. GOLDCAR products ensure that painted parts not only look aesthetically pleasing but are also optimally protected.

GOLDCAR products are manufactured using technologies based on CSV Group's many years of experience. The quality of these products is valued by the most demanding professional painters.

GOLDCAR products offer a balanced price-performance ratio. With GOLDCAR products, you secure the quality and efficiency of your workshop processes, reduce material costs, and optimize your vehicle's repair time.

GOLDCAR EASY HS Clear Coat 2:1

Protects the base color and gives it a beautiful shine.

GOLDCAR EASY HS is a two-component acrylic clear coat with high solids content and increased scratch resistance. It is characterized by long durability and easy application. Thinner is not required. The excellent flow ensures a smooth, high-gloss surface. The clear coat is extremely resistant to chemicals, mechanical damage, weathering, and UV radiation (does not yellow).

Key product benefits: easy, intuitive application; excellent flow properties for a smooth, high-gloss surface.

Mixing ratio with hardener: 2:1

The main advantages of EASY HS GOLDCAR Clear Coat are:

Intuitive application;

High gloss of the topcoat;

High flow properties;

Resistance to weathering and chemicals;

Scratch resistance;

Two special hardeners: Fast hardener and Standard hardener.

Areas of application: Recommended for application on complete components and small areas.

Suitable for application on water-based or solvent-based basecoats.

Please refer to the information in the technical data sheet.

NOTE:

Bring the product to the recommended processing temperature without pressure (avoid rapid heating/cooling). Processing below 18 °C is not recommended. Low processing temperatures change the properties of the paint coating (longer open time, coarser texture, longer curing time). Before application, the product temperature, object temperature, and air temperature in the spray booth should be approximately 20 °C.